Fiberglassed Coupler Tube

The first step in construction of the coupler tube, was to lay out all the parts I was going to need. This included precutting the fiberglass. For this tube I used enough for one complete wrap of 10.5 oz glass.
I mixed up enough West Systems epoxy for the job and poured it into a plastic pan.
Using a large (2") paint brush I completely covered the inside of the coupler tube with epoxy.

Part #1 Part #2 Part #3

Send your comments to:

Return to HOME page

Copyright 2000 - Wedge Oldham - All Rights Reserved -